How is olive oil adulteration prevented in the supply chain? Grade and purity checks

For a business that buys, blends and bottles olive oil, adulteration control rests on four steps: intake, grade decision, blending and batch records.

In the supply chain, olive oil adulteration is prevented by measuring at intake, before the oil is combined with other batches. For a business that buys, blends or bottles olive oil, that comes down to four steps: measure a delivery before it goes into the tank, tie the grade claim to measured values, let only batches with a known result into the blend, and record every decision against a batch number. A consumer trying to tell fake olive oil on the shelf or at home is in a different position; that side is covered in how to tell fake olive oil.

Where in the chain does adulteration enter?

Between the mill and the bottle, olive oil changes hands several times: the mill, a collector or trader, a bulk buyer, a blender and a filler. At each change of hands the oil goes into a new tank, and mixing can happen at any of these links.

The legal line is clear. The Turkish Food Codex Communiqué on Olive Oil and Olive Pomace Oil (2017/26) rules that olive oil may not be mixed into other vegetable oils and other vegetable oils may not be mixed into olive oil; olive pomace oil may never be called olive oil. Law No. 5996 prohibits imitation and adulteration of food and applies the sanction to the operator who produces the product or places it on the market under its own name. A company bottling under its own brand answers for a blend made in its supplier's tank as well.

The chain sees two kinds of problem. In one, a cheaper oil is mixed in; that is a purity problem. In the other, a lower-grade oil is sold as a higher grade; that is a grade problem. Each is looked for with different criteria.

What should be done at intake?

The job at intake is to reach a decision before the batch goes into the tank. That takes three things done together:

  • Take a sample from the delivery and keep part of it as a labelled retained sample.
  • Measure the sample before deciding to accept. Tasting shows defects and quality level, but a low proportion of refined oil or seed oil often leaves the flavour profile intact. Purity needs a separate measurement.
  • Link the result, together with the sample and supplier details, to that delivery's batch number.

A batch that comes out as suspect is kept apart from the main tanks and sent for laboratory confirmation. Until the result arrives, that oil does not go into a blend.

What should a grade claim rest on?

The Communiqué defines olive oil grades by measurable values. Free acidity is the best known of them, but it does not set the grade on its own. The Communiqué lists quality and purity criteria separately in its annex, defines sensory characteristics for virgin olive oils and sets decision trees for campesterol and delta-7-stigmastenol values. The thresholds by grade are in olive oil acidity.

On the buying side, the practical consequence sits in the contract. "Extra virgin" on an order stays open to dispute unless it says which parameters will be measured and by which method. An oil whose acidity is fine but which exceeds a limit in the sensory assessment or in UV absorbance cannot stay in the top grade. When the defining values are written down at the start, it is also clear how the intake measurement will be read, and a price difference can be negotiated by grade.

Why does blending raise the stakes?

Blending is routine in the olive oil trade. Virgin oils from different producers, regions or harvest periods are combined to get a consistent product. The only mixture of different grades the Communiqué allows is riviera olive oil: a blend of refined olive oil and virgin olive oils, sold under that name on the label.

Oil combined in a tank cannot be separated again. One problem delivery affects the whole batch it joins. A measurement after blending shows the state of the product, but only the intake records can say which delivery the problem oil came from. So the record of a blended batch should list the batch number and measurement result of every delivery that went into it.

When do records matter?

Records show their value most clearly in a dispute. The Communiqué states that official sampling is carried out under the Regulation on Official Controls of Food and Feed, and analyses under the Communiqué on Methods of Analysis of Olive Oil and Olive Pomace Oil. In an official dispute, that analysis decides. Under Law No. 5996, the parties concerned may object to official control results to the Ministry within seven days of notification. In that short window, what a business can rely on is its own intake record: which batch, on what date, from which supplier, with what measurement result, and where its retained sample is kept.

Records also feed supply decisions. Results collected by supplier make a recurring deviation visible. An outside source can be added: the Ministry of Agriculture and Forestry publishes products found to be imitated or adulterated, with company, brand, product and batch number, at guvenilirgida.tarimorman.gov.tr. Searching those records for supplier names before renewing a contract is a check that costs nothing.

How do field measurement and the laboratory split the work?

The intake measurement is for a fast decision; the final verdict comes from the laboratory.

Olivex assesses the purity and quality grade of olive oil at the point of purchase with an analysis set and a phone camera, and records every reading with its batch. It helps decide on the spot which delivery should go to the laboratory. Molevex measures a product accepted as genuine as a reference, compares later batches with that reference and confirms the result in the laboratory. Neither replaces official analysis carried out with the Communiqué's methods.

How Olivex works is described on the Olivex solution page, and the general framework for verification in food and beverages on the food and beverage industry page.

Sources

Meeting request

The right method for your product comes from the product itself.

The first meeting reviews your product group, your production flow and the points where verification will take place, and recommends a marking or analysis method.

Request a meeting